RWD - CE light not on..and that's a problem?
                    

Volvo RWD 900 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 4/2009 900 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY    PRINT   SAVE   A    A 

CE light not on..and that's a problem? 900 1994

I pulled the codes tonight from my new 940 and what I WANTED to see was 3-1-2 (bad wiring to knock sensor) which is my only on going issue, a slight ping under load.
Instead I got 1-2-1, the AMM , which should result in poor driving and mileage (I have neither and 17 -27 mpg) it also says the CE light should be on (it’s not) The same thing with codes from pin #6 , 2-4-1 ERG flow resulting in poor idle. The car purrs a kitten and again no CE light as the chart predicts.

Does this sound like a screwy ODB box as the FAQ suggest sometime happens or the owner screwing up reading the FAQs, which I suspect is more common.


Thanks again in advance.
Charles




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
CE light not on..and that's a problem? [900][1994]
posted by  soundmiami  on Thu Apr 23 22:29 CST 2009 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts