RWD - Just installed a new alternator
                    

Volvo RWD 120-130 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 4/2009 120-130 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY Replies to this message will be emailed.    PRINT   SAVE   A    A 

Just installed a new alternator 120-130

Hey all.
I just installed a new alternator in my 122, thought I would share.
A previous owner had installed a mitsubishi alternator into the car. it was a 40 amp and didnt have enough juice to run my stereo ( not a massive one), lights and windshield wipers. Lately, the belt would slip and squeal when too much load was on it.
I went to a local alternator rebuild shop and they made me a AC Delco 65 amp alternator and made it a one wire set up. even put on the same size pully as the old alternator so it would use same belt.
The delco has a one point mounting on the bottom, but was too long to fit in my car. So I took a grinder and grinded it down to the right thickness.
alt 1Grinded to fit
fit right in. It also used the same upper adjustment bracket.alt installedInstalled
Now all of my lights are brighter, and it seems to run smoother.
All is good and only cost $55.00.

Kent




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New Just installed a new alternator [120-130]
posted by  livelarg  on Sat Apr 18 19:09 CST 2009 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts