Volvo RWD 200 Forum
INDEX FOR 11/2009(CURRENT)
INDEX FOR 4/2008
200 INDEX
INDEX (NO RELOAD)
[<<]
[>>]
|
posted by
someone claiming to be Solaris
on
Thu Apr 3 16:25 CST 2008 [RELATED]
|
|
I've just replaced the upper/lower radiator hoses on my 1989 240 wagon. I followed the bentley manual. I didn't use the drain cock but did loosen it off to make sure coolant had reached it. I let the car run and it really creeps up toward the high temp mark. The thermostat should bleed the air right? I added a jug and a half of Prestone coolant to the system. Is that enough? I know it holds 9 litres using the drain cock method. In the process of putting a jug underneath I ripped off some of the rusted pre heat hose off. Do I need it? Thanks
|
Select, copy to buffer, and paste anywhere:
|
[about brickboard ads]
|
Cooling question [200]
posted by
someone claiming to be Solaris
on Thu Apr 3 16:25 CST 2008 >
V
-
Cooling question [200]
posted by
Brant_740t
on Fri Apr 4 15:02 CST 2008 >
V
-
Cooling question [200]
posted by
TONY H
on Fri Apr 4 07:42 CST 2008 >
V
Users marked in green are currently online.
©Jarrod Stenberg 1997-2007. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.