RWD - SU Fuel line to jet
                    

Volvo RWD 120-130 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 3/2008 120-130 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY Replies to this message will be emailed.    PRINT   SAVE   A    A 

SU Fuel line to jet 120-130 1965

I just picked up a '65 122S two weeks ago, and am having a blast working on it, which is good, since it's going to need a lot of work! I've already found Brickboard to be incredibly helpful.

Today, while I was fumbling around the carbs, I knocked one of the fuel lines out of the jets. (Dripping fuel on to the still-warm exhaust manifold. Not good.)

I imagine the fuel line is supposed to be connected solidly to the bottom of the jet assembly. I found a great post on how to attach the fuel line on the float side here:
http://www.brickboard.com/RWD/volvo/1053100/444-544/su_fuel_feed_line_problem.html

But I couldn't figure out how it's supposed to be secured on the jet side. I feel like I'm missing something obvious... I'd really appreciate it if someone could describe how the fuel line is supposed to be attached to the jet assembly.

Thanks!




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New SU Fuel line to jet [120-130][1965]
posted by  jjai  on Sun Mar 30 00:35 CST 2008 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts