AWD - Cleaning of 850-94 PNP switch
                    

Volvo AWD 850 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 10/2008 850 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY    PRINT   SAVE   A    A 

Cleaning of 850-94 PNP switch 850 1994

Hi, I have a 850S/NA-94 with 215 kkm.
In the past few years got few times at A1 313=incorrect signal from the gear position sensor (PNP), causing limb-home-mode making the car unusable for my wife.
Thus I now removed the PNP switch, opened it and cleared the contacts with PRF6-68, electronics contact dry cleaner spray, cleaned and lubricated the mechanics with servisol silicone crease there after.
Then I put everything together again without any adjusting problems at all and it seems to work.
It took me 2 hours to take PNP off and again 2 hours to put it back, the cleaner and crease cost practically nothing.
Now I’m exited to see if the 313 pops up again this autumn or do I have few non-problem years ahead, if so then I will repeat this for my 850SW-94 with 267 kkm, which has so far had only once the 313 last autumn.
Br Tapsa





Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New Cleaning of 850-94 PNP switch [850][1994]
posted by  tom 240  on Sun Oct 12 13:33 CST 2008 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts