Re: SUNROOF SEAL[200/90]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: SUNROOF SEAL[200/90] posted by Zee on
Thursday, 31 May 2001, at 12:13 a.m.

I have replaced a sunroof seal efore, but not that "windlace" which circumnavigates the opening. Just the "wiper" seal at the top, rear of the sliding panel.

For that one, I went to Home Depot and bought a commonly available bottom sweep seal for aluminum storm doors. It had a vinyl strip clamped into an aluminum strip. Removed the vinyl, which had a nearly identical profile to the Volvo seal. Glued it into place on the sunroof lid.

A direct replacement part for the main sunroof seal is pricey. Check the archives. someone reportedly found some comparable material at a home center. --
Zee. Easton, PA

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.