Re: Front Driver marker/turnsignal replacement[700/86]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Front Driver marker/turnsignal replacement[700/86] posted by albert on
Saturday, 26 May 2001, at 9:17 p.m.

Just replaced the driver side marker on mine a few weeks ago. I removed the entire low beam headlight assembly and the airbox to make as much room as possible to wiggle an open end wrench (10mm) around in there. Have a couple of extra nuts handy. Any that you drop will end up under the washer fluid reservoir, and you'll never see them again.

Not a difficult job, but you don't want to be in any hurry. Getting the nuts started may be the hardest part. You will probably lose some skin off your knuckles.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.