BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Get ready to vomit.[900/1996] posted by Shadow on
Thursday, 24 May 2001, at 6:45 p.m.
I'll bring you a big red bucket.
Per chance, were you pulling codes 113 and 115?
There is one, grounding tie point buried in that harness, below the intake manifold. It is held together by ultrasonic welding as opposed to solder, which is evil and bad for the environment.
Trouble is, that joint comes apart with time and is nearly impossible to trace.
In my case I pulled the manifold and all the crap in the way. Split open the harness. Excised all the bad material. Re-twisted the joint and laid in a big, fat load of silver solder. Taped it up with self-fusing silicone wrap and buttoned it up.
Never had another problem.
Sorry.
--People think I'm insane because I am frowning all the time. -Ozzy Osbourne, 1973