Re: Blower motor cuts out under load[700/1986]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Blower motor cuts out under load[700/1986] posted by Jack.Bramwell on
Thursday, 7 June 2001, at 12:47 a.m.

If you have a slide heat control then you don't have ACC which contains the programmer and you probably won't have a vacuum pump either. But here is the good news. You will be able to fit a mechanical hot water valve in place of the vacuum control one. You will have to get a longer cable and pass it through the fire wall at a suitable spot. I wish I could do that with mine. I have lloked at fitting a manual system but the wreckers want $200 so I continue to tinker.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.