BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: Washer fluid warning light[200/89] posted by Bill Houston on
Sunday, 15 October 2000, at 8:34 a.m.
There is a small tube that goes in the washer tank. It has a switch
that is activated by a magnet. The magnet floats around the outside of this tube. The problem is water gets in the tube and rusts/shorts out the
wires. You can disconnect these wires or replace the tube assy. I took
mine apart and replaced the switch with a new one from radio shack and
then sealed back with RTV.
Bill Houston