BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: Ignition and FI test points[700/1988] posted by abe crombie on
Sunday, 5 March 2000, at 2:25 p.m.
The ignition test point is next to air cleaner on left inner fender. It is a yellow/red wire.
A voltmeter connected between 12V and the test lead will give pulses from this test point. I don't recall all the codes but 4 flashes is a fault with knock sensor or its wiring.
Re: Ignition and FI test points[700/1988] posted by David Hunter on
Sunday, 5 March 2000, at 6:13 p.m.
Appreciate the answer. Will be looking at voltages/codes at this point.
Anyone know more about this test point and how it is used? Does it indicate stored codes or just current status. Does Bentley discuss?
Thanks
--David Hunter
Re: Ignition and FI test points[700/1988] posted by abe crombie on
Sunday, 5 March 2000, at 9:34 p.m.
The codes are only active codes. The codes are not stored. You need to drive car at several speeds and loads and then read codes w/o engine shutdown.