BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Volvo's new Injector seals look diff?[700/87] posted by Michael House on
Thursday, 17 August 2000, at 4:49 p.m.
Hi All,
I just picked up a set of fuel injector seal kits (donut, cap and spacer) for my 87 745Ti. The problem is that the grey spacer they came with looks and fits differently than the original. Is this supposed to be the case? Any sugggestions with the switch procedure would also be appreciated.
Thanks
Michael
Michael House
Re: Volvo's new Injector seals look diff?[700/87] posted by Rene Svastal on
Thursday, 17 August 2000, at 11:11 p.m.
I have done this, and I was told to keep the old spacers and use them. The new spacers are too thin. The mechanics at the dealer evn re-use the old ones, after all, they don't wear out.
Rene
absolutvolvo@visto.com 1988 745GLT B230F (M46 1982 240DL) 321000Km Toronto B23ET project
AW71 to M46