Re: Glove Box door Stuck[850/94]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Glove Box door Stuck[850/94] posted by Rich K. on
Monday, 4 October 1999, at 6:55 p.m.

You take a rage and wrap it around a 12" pry bar and pry the box open as far as you can, then you take a saw with a 3-4" blade and you cut the wire like latch that the door latches to. Now if you are not careful you will damage the trim on the door, but knock on wood I haven't messed up one in a long time. Patients. After cutting through you can get in and replace the broken componants in the door as well as the part you had to cut. --
Rich K.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.