BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: CRAP!!! nothing changed[200/1980] posted by Don Foster on
Saturday, 31 July 1999, at 9:46 p.m.
Paul --
The "frequency valve" buzzes 'n clicks 'n chatters during normal operation. First, with the engine idling, listen or feel to valve to confirm that it's speaking to you. Second, while idling, unplug connector at the relay and see if the engine changes idle (probably drop and become rough).
If yes, then you've disabled a functioning system. If no, then be suspicious that it's not working.
Also, pull the connector at the valve. 'Though difficult to see in the pix, you'll see on your car that it faces upwards and can hold water. If water's present it'll dissolve the internal connectors over time (because of electrolytic action).
While you have the connector off the relay, inspect the connectors -- looking for corrosion, oxidation, or signs of bad connections. Clean 'em all up -- if nothing else, as a preventative measure.