Re: Front ABS Sensors[700/90]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Front ABS Sensors[700/90] posted by abe crombie on
Sunday, 14 February 1999, at 5:16 p.m.

The sensors fit into the holes in the spindles with clearance to spare. Twist them as you pull on them and they should come right out.
If they are the style constructed with two steel strips bonded to a magnet in the center to make the tip (made by VDO) then they will have a much greater tendency to have the low speed modulation as you have experienced. The other style (Bosch) have a diamond shaped tip that is all steel.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.