Re: Crankcase Pulley Bolt[200/1989]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Crankcase Pulley Bolt[200/1989] posted by Dave Farrington on
Monday, 8 February 1999, at 6:44 p.m.

One may certainly pull the starter and block the flywheel with a suitable wedge. I've found that one of my cold chisels fits well. But, you'll be sure that I'll try first to throw all my weight into a breaker bar with the car in gear and the brakes engaged. Then I'd try the 'ol rope trick. And finally, if it's getting me to curse, I'll go to the starter. --
'79 245 254k, '88 745ti 190k, '73 P1800ES 101k

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.