Re: Hall Effect Sensor[200/82]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Hall Effect Sensor[200/82] posted by abe crombie on
Monday, 16 August 1999, at 7:17 p.m.

The hall sensor outputs a ground to the 5V reference signal out of ign ecu. If you have a 5V signal, a 12V signal, and a ground at the harness plug and then you jump between the ground and the 5V pin and you don't get one spark from coil and one brief activiation of fuel pump relay (and pumps) then look to ign ecu. If the jumper accomplishes those things then fetch a new hall sensor.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.