BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: power source for boost gauge[V70/1998] posted by Chie on
Monday, 23 August 1999, at 4:59 p.m.
The dealer wasn't able to find in the parts manual the part number
for the pins for connecting into the accessory connector; but a
technician remembered that there was a service bulletin, and found
it with all the necessary part number information.
Here is what the bulletin has...
Minitimer pins for 8-pin connector
P/N Conductor Size
969780-6 0.5 - 1.0 mm2
974313-9 1.0 - 2.5 mm2
968374-9 2.5 - 3.0 mm2
It also say...a 2.5-3.0 mm2 conductor should always be connected to
pin-1 (battery) of the 8-pin connector due to possible high current
intensity.
Translating the mm2 number into gauge, I think for a 16-gauge or
18-gauge wire, which I will use for the turbo boost gague, I will
be using 974313-9.
Chie
1998 V70 T5M, IPD turbo boost gauge