Re: US vs Cdn headight switch[850/95]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: US vs Cdn headight switch[850/95] posted by Rodger on
Wednesday, 4 August 1999, at 3:17 p.m.

Since you have the 95-97 850 switch (verses the 92-94 switch), after you remove it from your dash, you can just take the cover off the back of it, remove the plastic rod that runs though the switch to the front side, and then you can manually position the selector on the back of the switch to one of the other two positions. The switch is internally the same as the US switch, but they just replaced the US "screwdriver switch" with a plastic rod that locks it into place.

Rodger --
99V70T5M

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.