The Brickboard Search Engine - $&(q)
                  

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.


Re: ZF Trans draining[700/87] posted by Mark on
Sunday, 4 April 1999, at 7:51 p.m.

Use synthetic ATF.
- Drain the fluid from the trany pan.
- Fill it up with new ATF.
- Disconnect the return line by the trany (it is the upper line on the radiator that goes back to the trany).
Slide clear plastic hose over the disconnected line and ask somebody to start the engine.
When you see air babbles coming out from the line shut off the engine.
- Repeat the procedure one more time and you are done.

This way you replace the fluid from the torque converter.

Mark




 


©Jarrod Stenberg 1997-2007. All material except where indicated.



Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Powered by Denizen Motive Forum - Custom Software for Volvo Enthusiasts