BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: Power sunroof[850/'94] posted by Tony Giverin on
Saturday, 10 April 1999, at 7:23 p.m.
Serban,
Assuming there is no dirt or grit in the tracks causing the roof not to seat properly....there is a roff adjustment procedure using three screws found on the sides, just above the track. Screw #1 (at the front) adjusts front vertically/horizontally. Screw #2 (in the middle) adjusts lengthways. Screw #3 (at the rear) adjusts rear vertically. BTW the roof thould line with the car roof, except the front where it should be 1mm lower.
Adjust position of sunroof so rivet center lines up with radius of slider rail.
Good Luck...:)
tony g...'94 850GLT, '82 240DL (mint)