Re: Vibration from A/C Blower Motor??? cont'd[850/1993]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Vibration from A/C Blower Motor??? cont'd[850/1993] posted by abe crombie on
Friday, 4 September 1998, at 8:24 p.m.

I believe that your front mount (Under crank pulley) is likely the culprit as they do fail in time.
You can support engine by placing a block under the front end adjacent to oil filter and then lifting. You do not want to lift excessively and you certainly do not want to lift 6 or more inches back from crank end of pan as that is where it is an unsupported aluminum thin casting. You will only need lift it enough to ease weight off the mouint so bolts come out without stress.
On a car with good mounts the rubber bumper on left underside of transmission will have only 1/2 " clearance.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.