The Brickboard Search Engine - $&(q)
                  

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.


Lead Substitute - how effective?[ALL/Pre '75?] posted by Trevor G. on
Saturday, 21 November 1998, at 1:16 p.m.

Since unleaded gas is taking over the world, various after-market lead substitute additives have become available to fight the dreaded exhaust valve seat recession in older engines which do not have hardened exhaust valve seats. I know the real solution is to have hardened seats installed, but I would like to read some comments from people who have used these additives as to what brand seems to be the best and how effective they seem to be. TIA. --
Trevor G. ('68 144S (47K) and '71 144S (144K)), both with BW35s.)


Re: Lead Substitute - how effective?[ALL/Pre '75?] posted by Bernard on
Saturday, 21 November 1998, at 8:14 p.m.

I really have my pulse on the issue, not less in Europe than over here in the States. Jean is right when saying that gasoline has been robbed of its lead contents gradually. And then, overnight, so to speak, there was no leaded gasoline available anymore, at least not here in California, and all my buddies with HiPo cars-where storming the gas stations that sell 100 octane race gas for $3.00 a gallon.

Europeans, foremost the analytical Germans who nowadays question everything without scientific proof, were afraid something like that could happen to them too and therefore wanted to know exactly what happens to valve seats when they are exposed to unleaded gasoline over an extended period of time.

Theoretically, as we all know, they will eventually be "eaten up" without the protecting lead found in leaded gasolines. However, the German car magazine "Markt," focused on classic cars only, took five different cars, among them a Volvo P544, and had them use exclusively unleaded gasoline for 40K kilometers. Before the test started, the heads were taken off an inspected and measured. After the test, they did exactly the same and guess what: There was hardly any regression measurable except on the Mercedes 230S they used as the fifth car!

Now, that might surprise many people; it sure surprised me as someone who helped developing fuels, but that's exactly the results of a real-live test. Apparently, many vehicles, among them vintage Volvos, will have no trouble surviving unleaded gasoline without hardened valve seats for a much longer time than generally assumed. Consequently, my advice to people asking me in this regard is to use some lead substitute once a while and do the valve seats when the head has to come off anyway or when they experience problems. Since that might not happen before the turn of the millenium, maybe even much later, I personally do not think that preventive measurements make a lot of sense, from a financial point of view.

Bernard




 


©Jarrod Stenberg 1997-2007. All material except where indicated.



Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Powered by Denizen Motive Forum - Custom Software for Volvo Enthusiasts