BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: Response...[850/'94] posted by Leo Montreuil on
Saturday, 28 November 1998, at 10:32 p.m.
When you repaced the old Box A with the new Box A you had to disconnected some kind of connector. Is that connector has 8 pins? I think that pin 4 and pin 8 are the wire supplying the +12V and ground that feed the pushbutton, the flylead and the LED.
Here is a list of connections to Box A:
pin 1 : auto transmission contoller
pin 2 : Motronic ECU
pin 3 : ABS unit
pin 4 : +12V from fuse #33 (did you check the fuse?)
pin 5 : No connection
pin 6 : Motronic ECU
pin 7 : to instrument cluster
pin 8 : Ground (from ground point in (or near) fuse box)
For Box B:
pin 1 : Climate control
pin 2 : Cruise control
pin 3 : No connection
pin 4 : No connection
pin 5 : Airbags unit
pin 6 : Power seat
pin 7 : No connection
pin 8 : No connection
Go check at that connector if you have +12V and ground. Is the fuse #33 OK?
Leo Montreuil