Re: can't resurface brake rotors?[240-260/82]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: can't resurface brake rotors?[240-260/82] posted by John Hannon on
Friday, 29 May 1998, at 7:07 p.m.

Rob, there is a wear limit specification on the rotors. If they are very badly scored or were machined before and out of tolerance then they are usually replaced. The thickness of the rotor disc is measured. The specification for wear limit depends on the type of rotor (Solid or Ventilated) and manufacturer (ATE or Girling).
Hopefully they are all not out of spec!

John Hannon

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.