BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Low beams work, High beams create blackout on drivers side, Lamps fine!?[240-260/1982] posted by Tony Giverin on
Thursday, 23 July 1998, at 10:50 p.m.
When turning on my high beams, instead of all 4 lamps coming on, the passenger side works, but the drivers side doesn't, including the low beam. In other
words, the high and low beams of the passenger side work, the high and low beams of the drivers side don't. This is only when the high beams are activated.
The low beams work as usual. Also I swapped high beam lamps and determined that they both work! I re-seated the connections to no avail. Is the problem related to the relay/switch box, located on the drivers side inner fender?
Tony G
Re: Low beams work, High beams create blackout on drivers side, Lamps fine!?[240-260/1982] posted by irv klein on
Thursday, 23 July 1998, at 11:46 p.m.
Its a corroded connection. Take apart the connector which leads to lights which dont go on. Clean up the spades and you should be ok. I dont think you have a relay problem since one set of lights works properly.