Re: Bringing Power door locks back to life...[240-260/1983]

BrickBoard Archives

The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.

Re: Bringing Power door locks back to life...[240-260/1983] posted by robert haire on
Saturday, 11 July 1998, at 4:17 a.m.

Does the driver's door key fail to activate the other locks, but the driver's plunger sends its signal? If that is the case, there is a fragile little plastic electric collar around the driver's lock cylinder that may be bad. You might want to remove the inner door panel and replace the collar. It is easy to break them (collars) if you do not unhook them carefully. If neither the key nor the plunger work the other locks I would check the wiring harness inside the drivers door.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.