BrickBoard Archives
The files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: 240DL repairs. Help me prepare.[240-260/1989] posted by Randy on
Friday, 24 April 1998, at 2:59 p.m.
> Stoney mentioned a technique someone else mentioned involving using the >starter to get the pully bolts off. Anyone?
Put the correct size socket on a long 1/2" breaker bar. Disconnect coil wire and ground it. Fit socket to bolt head and rotate the breaker bar into a position against the inner fender on the driver's side. Make sure you have disconnected the coil wire and grounded it ! Turn the ignition to the on position. Give a quick "bump" to the starter. Bolt should be loose enough to continue removing it with the socket and a ratchet.